A study on the spectral,microstructural, and magnetic properties of Eu–Nd double-substituted Ba0.5Sr0.5Fe12O19 hexaferrites synthesized by an ultrasonic-assisted approach

In this study, an examination on the spectral, microstructural, and magnetic characteristics of Eu–Nd double-substituted Ba_0.5Sr_0.5Fe₁₂O₁₉ hexaferrites (Ba_0.5Sr_0.5Nd_xEu_xFe_12−2xO₁₉ (x = 0.00–0.05) HFs) fabricated by an ultrasonic-assisted approach has been presented. An UZ SONOPULS HD 2070 ultrasonic homogenizer with frequency of 20 kHz and power of 70 W was used. The chemical bonding, structure and the morphology of the products were evaluated by Fourier-Transform Infrared (FT-IR) Spectroscopy, XRD (X-ray diffraction), scanning and transmission electron microscopy and techniques. The textural properties of the prepared nanomaterials were examined by using the Brunauer-Emmett-Teller (BET) method. The magnetic properties were studied using a vibrating sample magnetometer (VSM) at room temperature (RT) and low temperature 10 K. The magnitudes of various magnetic parameters including M_s (saturation magnetization), M_r (remanence) and H_c (coercivity) were estimated and evaluated. The M-H loops revealed the hard ferrimagnetic nature for all products at both temperatures. The M_s and M_r values showed a decreasing tendency with increasing degree of Eu³⁺ and Nd³⁺ substitutions whereas H_c values displayed an increasing trend. At RT, M_s, M_r and H_c values lie in the ranges of 63.0–68.8 emu·g⁻¹, 24.6–39.2 emu·g⁻¹ and 2252.4–2782.1 Oe, respectively. At 10 K, the values of M_s, M_r and H_c lie between 87.5–97.1 emu·g⁻¹, 33.5–40.1 emu·g⁻¹ and 2060.6–2417.2 Oe, respectively. The observed magnetic properties make the prepared products promising candidates to be applied in the recording media.     

Identifying bacterial fragments on morphologically similar substrate using UAFM

The ultrasonic atomic force microscopy (UAFM) can be used effectively to map the elasticity of a surface. Using this technique we have demonstrated that biological fragments on a substrate can be easily identified which is otherwise difficult using only an AFM image. We have shown that AFM image can falsely interpret the surface morphological features on the substrate. We have taken the bacteria Pseudomonas sp. as a case study to demonstrate that UAFM technique is a powerful tool to study biological samples and differentiate morphological features on the substrate.     

Novel polyester/SiO2 nanocomposite membranes: Synthesis,properties and morphological studies

In this paper, a new type of soluble polyester/silica (PE/SiO₂) hybrid was prepared by the ultrasonic irradiation process. The coupling agent γ-glycidyloxypropyltrimethoxysilane (GOTMS) was chosen to enhance the compatibility between the polyester (PE) and silica (SiO₂). Furthermore, the effects of the coupling agent on the morphologies and properties of the PE/SiO₂ hybrids were investigated using UV-vis and FT-IR spectroscopies and FE-SEM. The densities and solubilities of the PE/SiO₂ hybrids were also measured. The results show that the size of the silica particle was markedly reduced by the introduction of the coupling agent, which made the PE/SiO₂ hybrid films become transparent. Furthermore, thermal stability, residual solvent in the membrane film and structural ruination of membranes were analyzed by thermal gravimetric analysis (TGA). The effects of SiO₂ nanoparticles on the glass transition temperature (T_g) of the prepared nanocomposites were studied by differential scanning calorimetry (DSC). Moreover, their mechanical properties were also characterized. It can be observed that the Young's moduli (E) of the hybrid films increase linearly with the silica content. The results obtained from gas permeation experiments with a constant pressure setup showed that adding SiO₂ nanoparticles to the polymeric membrane structure increased the permeability of the membranes.     

Effect of ultrasound on the synthesis of low-modulus zeolites from a metakaolin

It was studied the effect of ultrasonic processing (22 kHz) of the aqueous suspension of metakaolin, sodium hydroxide and alumina with a molar ratio 2Al₂Si₂O₇:12NaOH:2Al₂O₃ on the low-modulus zeolite synthesis processes. To investigate the XRD, SEM, IR, EDS had been used. It was shown that after ultrasonic processing, sodium aluminates are formed, what leads to a change in process of further synthesis. It was found that without ultrasonic processing on the stage of thermal treatment at 650 °C, SOD zeolite (|Na₆|[Al₆Si₆O₂₄]) and sodium aluminosilicate (Na₆Al₄Si₄O₁₇) are synthesized. In the sample after ultrasound during thermal treatment, only sodium aluminosilicates of cubic syngony (Na₆Al₄Si₄O₁₇ and Na₈Al₄Si₄O₁₈) are formed. It was demonstrated that sodium aluminosilicates are precursors for the formation of LTA zeolite (|Na₁₂|[Al₁₂Si₁₂O₄₈]). As a result zeolitization of sodium aluminosilicates after the hydrothermal crystallization in alkaline solution, the sonicated sample contained 97 wt% LTA. Without ultrasonic processing, the product of synthesis contained 50 wt% SOD and 40 wt% LTA.     

连续臂丛神经阻滞镇痛对断指再植血流动力学影响的研究

目的研究连续臂丛神经阻滞镇痛对断指再植术后再植指血流动力学的影响，探讨其缓解血管痉挛、增加血流量的可行性。方法将60例急诊行断指再植术患者按随机数字表法分为术后连续臂丛神经阻滞镇痛组（CA组）和对照组（NA组），每组30例。观察两组患者再植指术后血管痉挛、血管栓塞和指体坏死发生例数并计算再植指成活率，记录两组术后即刻（T1）、术后24h（T2）再植指固有动脉血流动力学参数及动脉内径（AD）、远指端血氧饱和度（SpO2）和温度（Ts）变化。结果断指再植术后成活率CA组高于NA组，血管痉挛、血管栓塞和指体坏死发生率CA组均低于NA组，差异均有统计学意义（均P＜0.05）。在T2时CA组各项血流动力学参数、AD、SpO2、Ts均高于NA组，阻力指数（RI）低于NA组，差异均有统计学意义（均P＜0.05）。结论术后连续臂丛神经阻滞镇痛可以缓解再植指固有动脉痉挛，增加指体血流量，提高了断指再植的成功率。     

Sonochemical synthesis,formation mechanism,and solar cell application of tellurium nanoparticles

Tellurium inherently tends to form 1-D structures and while the 0-D Te nanostructures have better properties and applications in solar cell. In the present study, 0-D Te nanostructures including rice-like and spherical nanoparticles with the particle size of 15–40 nm were successfully synthesized via a facile sonochemical method. In the absence of ultrasonic irradiation nanorods were produced while performing the reaction under ultrasonic waves (at 200 W for 30 min) led to the formation of nanoparticles. Finally, the efficiency of various as-synthesized Te nanostructures in quantum dot-sensitized solar cells (QDSSCs) were evaluated. Using rice-like nanoparticles led to increase in J_SC, V_OC, FF and η parameters from 1.22, 0.54, 0.49 and 0.32% to 1.57, 0.64, 0.63 and 0.63%, respectively, compared with nanorods.     

Distorted wave response of ultrasonic annular stator incorporating non-uniform geometry

The traveling wave ultrasonic stator is normally fabricated with teeth. The tooth geometry improves the driving speed, but it creates natural frequency splitting and mode contamination, especially a distorted traveling wave. A dynamic model of a stepped-plate periodic stator is developed to examine the distortion. The stator is treated as an annular supported by a thin mid plate, and the support stiffness is formulated by using equivalent energy principle. The effects of the tooth and mid plate on the natural frequency and vibration mode are examined by using the perturbation method. The rules governing the frequency splitting, frequency perturbation as well as mode contamination are also identified. The traveling wave response and elliptical trace on stator surface are obtained by using the mode superposition method and they are proved to be distorted due to the tooth geometry. The response at the repeated doublets becomes coupled forward and backward traveling waves, but that at the split doublets becomes coupled forward traveling, standing and backward traveling waves. The results indicate that the tooth mass instead of the stiffness decreases the vibration amplitude and driving speed of the dominant wave, but their effects are different at the repeated and split doublets. Inspection of the model implies that the distortion can be suppressed by using a suitable combination of the wavenumber, tooth count, tooth height and occupying fraction. Numerical calculations are carried out to demonstrate the tooth geometry effect on the transient waveform, driving speed and elliptical trace. The optimization of the tooth geometry that can help achieve a purer traveling wave is discussed.     

Untersuchungen zur Empfindlichkeit der β-Rückstreumethode bei der Messung dünner Auftragsschichten mit einem 11C-Spezialpräparat

Die Bestimmung dünner Auftragsschichten auf bewegten Trāgermaterialien mit der β-Rūckstreumethode hängt wesentlich von der Empfindlichkeit der Messung und der Dynamik des Prozesses ab.

In diesem Beitrag wird für spezielle Stoffe der Einfluβ der Trāgermaterialien bei Mehrschichtproblemen auf die Empfindlichkeit untersucht.     

高效液相色谱-电感耦合等离子质谱法分析海洋沉积物中有机锡的形态

建立了高效液相色谱-电感耦合等离子质谱(HPLC-ICP-MS)测定海洋沉积物中二丁基锡(DBT)、三丁基锡(TBT)、二苯基锡(DPhT)及三苯基锡(TPhT)的形态分析方法。通过改变流动相组分比例,使4种有机锡达到基线分离。比较不同提取方法对标准参考物质PACA-2中有机锡的提取效率。以V(乙腈)∶V(H2O)∶V(乙酸)=55∶33∶12(含5%三乙胺,pH 3.0)为提取剂时,超声提取效率最高(>91.5%),其加标回收率均大于96%。本方法对DBT,TBT,DPhT和TPhT的检出限分别达到0.7,0.75,0.45和0.4μg/kg。对浓度范围为0.5～100μg/kg有机锡混合标准溶液进行测定,4种有机锡回归系数均大于0.998。利用本方法对几种海洋沉积物样品和海产品中的有机锡进行测定,在部分沉积物样品中检测到了DBT和TBT,部分海产品中测到了少量TBT和TPhT。